On the Lenticular, 2D and Stereoscope tab there is an option enabling to print the generated image.

Fig. 2.22 - Stereoscope tab

In Fig. 2.22 you can see the following control elements:

  • Rotate - rotate the image by 90ะพ;
  • Page setup - change page settings;
  • Printer icon - instant print with the set-up parameters;
  • Print... - change printing/printer parameters and/or print;
  • Zoom in/Zoom out - zoom in/out the image;
  • Fit all - unzoom the image;
  • Save image... - save the image.